A-26 Invader with Retracts and Scale Struts, Camo 1730mm (68") Wingspan - ARF from Nexa - NXA1021-001
The Nexa A-26 Invader is one of the few balsa planes to include electric retracts and scale struts in the box with the plane. This is a 68" wingspan electric or gas option scale series warbird, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, and includes painted pilot, tanks, antenna and other scale details. The large battery hatch affords ample room for either electric or gas setups. To complete the scale appeal of this A-26, the model includes electric retracts and scale struts. Impress at your flying field with this iconic stunner!
Visit the Official Nexa A-26 Invader 1730mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Fully Covered and Detailed
The Nexa A-26 Invader comes fully covered including simulated panel lines, rivets, nomenclature and weathering detail.
Scale Details Throughout
There is no shortage of scale details with this A-26 including fuel tanks, antenna, machine guns, painted pilot, electric retracts and metal main struts.
Prehinged and Installed Control Surfaces
All control surfaces come out of the box fully prehinged and installed for your convenience.
Impressive Size
To add to the array of scale detail, the Nexa A-26 comes with a nearly 70" wingspan.
Features:
Complete Balsa and lite-ply construction for rigidity and durability
Covered from tip to tail in scale details including weathering, printed simulated panel lines and rivets
Fiberglass cowlings for strength and durability
The hand-painted pilot is ready for your added cockpit details
All control surfaces come out of the box pre-hinged and installed for convenience
Tanks, antenna, guns and more complete the fantastic scale appeal
Large battery hatch allows for your chosen electric or gas setup
Includes:
Nexa A-26 Invader Camo 1730mm (68") Wingspan - ARF
Electric retracts, wheels and struts
Fuel tank, hardware and servo trays
Requires:
6 Channel radio - select a minimum 6 channel radio from our Radio Collection
6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
2x Brushless outrunner motors - we recommend the Admiral GP5 4220-770Kv Brushless Motor Multi-Pack (2 Motors)
2x 45 Amp brushless ESC - we recommend the ZTW Mantis G2 45A ESC with 4A SBEC Multi-Pack (2 ESCs)
4x standard servos for ailerons, elevator and rudder - we recommend the Hitec HS-485HB Deluxe Ball Bearing Karbonite Gear Standard Servo Airplane Multi-Pack (4 Servos)
TWO 4 Cell 14.8V 3000 mAh LiPo Batteries - we recommend the Admiral 3000mAh 4S 14.8V 35C LiPo Battery with XT60 Connector Multi-Pack (2 Batteries)
1x standard and 1x reverse electric propellers - we recommend APC 12x8 Thin Electric Propeller - Black and APC 12x8 Thin Electric Pusher Propeller - Black
4 Cell compatible battery charger - select a minimum 4 cell (4S) charger from our Charger Collection
Gas Requires:
2x .25 - .52 (4cc - 8.5cc) gas engines
1x standard and 1x reverse gas propellers
Customer Note
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).