Yak 11 2350mm (92.5") Wingspan from Black Horse - Balsa Wood ARF - BHM1016-001
SPECIAL NOTE PLEASE READ: This Yak-11 must ship via freight on a pallet. You must be home at the time of delivery to sign and help the driver move the plane into your garage. This product will not ship the same day due to the freight line pickup schedule. A $200 discount is available for customers willing to pickup this plane at the Motion RC warehouse.
The Yakovlev Yak-11 is a trainer aircraft used by the Soviet Air Force and other Soviet-influenced air forces from 1947 until 1962.
The Black Horse Yak 11 faithfully represents the classic Russian trainer as attention was paid to a true to original appearance and best possible flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 40-60cc displacement.
Visit the Official Black Horse Yak 11 2350mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
\n
\n
\nFactory Weathered Printing
The printing on this model has a realistic weathering complete with rivet and panel line detail that elevates the model to a whole new level of scale appeal.
\n
\n
\n
\n
\nNaca Airfoil Design For Improved Airflow
The Yak 11 utilizes a Naca airfoil design which maximizes airflow above and below each wing for increased lift and performance.
\n
\n
\n
\n
\nElectric Power
The Yak 11 uses an electric power recommendation with ample room for your electronics but can accept a gas power setup as well.
\n
\n
\n
\n
\nLarge Wingspan
The impressive 92.5" wingspan offers impressive presence both in the air and on the ground.
\n
\n
Features:
\nHigh level of prefabrication right out of the box
\nLightweight, strong, laser cut balsa and plywood construction
Panel lines and details printed directly onto the pre-applied, high quality covering
Electric retracts with oleo struts for quality and scale appeal
Recessed hinges on all control surfaces
Pre-drilled hinge mounting holes
Heavy-duty pin hinges on all control surfaces
Large easy access fuel tank\/battery\/servo access hatches with spring loaded latches
Painted and detailed cockpit, pilot and interior included
Fiberglass control horns with ball link connector
Comprehensive control and fitting accessories included
Four-piece, plug-in wings simplify transportation and assembly
Fiberglass cowl
Mounts for both electric and gas power options included
\nIncludes:
\nBlack Horse Yak 11 2350mm (92.5") Wingspan - ARF
Electric retracts with oleo struts
Instruction manual
\n
Requires (Electric):
\n8 Channel radio - select a minimum 8 channel radio from our Radio Collection
\n8 Channel receiver - select a minimum 8 channel receiver from our Receiver Collection
\n180Kv Brushless outrunner motor - we recommend the Admiral GP60 8925-180Kv Brushless Motor
\n130 Amp brushless ESC - we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC
\n2x 2S 2000-3000mAh LiPo or LiFe receiver packs - we recommend Admiral 2100mAh 2S 6.6V LiFe Battery with XT60\/JR\/Futaba Connectors
\n8x high torque servos - we recommend 8 Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servos
\nFor 10S setup TWO 5 Cell 18.5V 5000 - 6000mAh LiPo Batteries with EC5 connector in series - we recommend Admiral Pro 6000mAh 5S 18.5V 50C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
\nEC5 2-to-1 series adapter - BenchCraft EC5 2 to 1 Series Adapter with 10 Gauge Silicone Wire
\nElectric propeller - we recommend between an APC 24x10E and 25x12 2-blade propeller
6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
\n
Requires (Gas):
\nEngine: 40-60cc gas
Gas Propeller: N\/A
\n
Customer Note
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).