Macchi MC-205 Veltro 1580mm (62") Wingspan - ARF from Nexa - NXA1034-001
The Macchi C.205 Veltro was an Italian World War II fighter aircraft built by the Aeronautica Macchi. Along with the Reggiane Re.2005 and Fiat G.55, the Macchi C.205 was one of the three "Serie 5" Italian fighters built around the powerful Daimler-Benz DB 605 engine.
The Nexa Macchi MC-205 Veltro is a electric or gas option .46-size aerobatic airplane with a 1580mm wingspan, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system. This model includes a fiberglass cowl, painted pilot and other scale details. The large battery hatch affords ample room for either electric or gas setups. Impress at your flying field with this iconic World War II axis warbird!
Visit the Official Nexa Macchi MC-205 Veltro 1580mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
\n
\n
\nFully Covered and Detailed
The Nexa Macchi MC-205 Veltro comes fully covered including simulated panel lines and rivets.
\n
\n
\n
\n
\nScale Details Throughout
There is no shortage of scale details with this Macchi MC-205 Veltro including a detailed cockpit and painted pilot.
\n
\n
\n
\n
\nAccessible and Large Battery Hatch
The battery hatch is easy to access and large enough for your choice of battery\/electronic equipment.
\n
\n
\n
\n
\nFly An Allied Classic
The Macchi MC-205 Veltro is an iconic Italian WWII warbird that performs aerobatics with ease and style and looks menacing while doing it.
\n
\n
Features:
\nComplete Balsa and lite-ply construction for rigidity and durability
Covered from tip to tail in scale details including painted pilot, printed simulated panel lines and rivets
Fiberglass cowling for strength and durability
All control surfaces come out of the box pre-hinged and installed for convenience
Large battery hatch allows for your chosen electric or gas setup
\n
Includes:
\nNexa Macchi MC-205 Veltro 1580mm (62") Wingspan - ARF
Wheels and spinner
Fuel tank, hardware and decals
\nRequires:
\n6 Channel radio - select a minimum 6 channel radio from our Radio Collection
\n6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
\n400Kv or equivalent brushless outrunner motor - we recommend the Admiral GP10 5030-400Kv Brushless Motor
\n70 Amp brushless ESC - we recommend the ZTW Mantis G2 85A ESC with 8A SBEC
\n4x metal gear servos for ailerons, elevator, and rudder - we recommend Hitec D-645MW High Voltage High Torque Digital Metal Gear Servo Airplane Multi-Pack (4 Servos)
\n2x micro metal gear servos for flaps - we recommend Hitec HS-82MG Metal Gear Micro Servo Airplane Multi-Pack (2 Servos)
\n4 Cell 14.8V 4500 - 5000mAh LiPo Battery - we recommend the Admiral Pro 5000mAh 4S 14.8V 60C LiPo Battery with EC5 Connector
\nStandard 13x8 2-blade electric propeller - we recommend the APC 13x8 Thin Electric Propeller - Black
\n4 Cell compatible battery charger - select a minimum 4 cell (4S) charger from our Charger Collection
\nElectric retracts with upgraded struts - Nexa 46 Size Electronic Retract Set with Upgraded Struts
\n
Gas Requires:
\n.46 - .70 (7.45cc - 11.5cc) gas engine - we recommend the NGH GT9 Pro 9cc Two-Stroke Engine
\nStandard 12x6 2-blade gas propeller - we recommend the APC 12x6 Gas Propeller
\n
\nCustomer Note
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).