Pilatus PC-6 Swiss 1580mm (62.2") Wingspan - ARF from Nexa - NXA1054-001
The full-size Pilatus PC-6 is a STOL workhorse capable of operating in rugged, short-field conditions for light transport roles.
The Nexa Pilatus PC-6 Swiss is an accurate replica with all balsa construction. With a detailed covering and painted fiberglass cowl, the Pilatus PC-6 Swiss will make a beautiful addition to anyone's hangar and the pre-hinged control surfaces will have it in the air in no time.
Visit the Official Nexa Pilatus PC-6 Swiss 1580mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
\nComplete Balsa and lite-ply construction for rigidity and durability
Covered from tip to tail in scale details
Large battery hatch allows for your chosen electric or gas setup
\nIncludes:
\nNexa Pilatus PC-6 Swiss 1580mm (62.2") Wingspan - ARF
Landing gear and wheels
\nRequires:
\n5 Channel radio - select a minimum 5 channel radio from our Radio Collection
\n5 Channel receiver - select a minimum 5 channel receiver from our Receiver Collection
\nBrushless outrunner motor - we recommend the Admiral GP10 5030-400Kv Brushless Motor
\n120 Amp brushless ESC - we recommend the Castle Creations Talon High Voltage 120A ESC with 20A BEC
\n4x 45g standard servos for elevator and rudder - we recommend Hitec D-645MW High Voltage High Torque Digital Metal Gear Servo Airplane Multi-Pack (4 Servos)
\n4 Cell 14.8V 4500 - 5000 mAh LiPo Batteries - we recommend the Admiral 5000mAh 4S 14.8V 40C LiPo Battery with XT60 Connector
\nElectric propeller - we recommend the APC 13x8 Thin Electric Propeller - Black
\n4 Cell compatible battery charger - select a minimum 4 cell (4S) charger from our Charger Collection
\n
Gas Requires:
\n2-stroke engine - we recommend the NGH GT9 Pro 9cc Two-Stroke Engine
\n2-blade gas propeller - we recommend the APC 12x6 Gas Propeller
\nSilicone fuel tube
\n
Customer Note
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).