PA-22 Tri-Pacer 1620mm (63") Wingspan - ARF from Nexa - NXA1027-001
The PA-22 Tri-Pacer is a light strut-braced high-wing monoplane aircraft built by Piper Aircraft from 1949 to 1964.
The Nexa PA-22 Tri-Pacer is a electric or gas option .60-size civil airplane with a 1620mm wingspan, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, fully functional flaps, fiberglass cowl, wingtip tanks and other scale details. The large battery hatch affords ample room for either electric or gas setups. Impress at your flying field with this fun civil flyer!
Visit the Official Nexa PA-22 Tri-Pacer 1620mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Fully Covered
The Nexa PA-22 Tri-Pacer comes fully covered in an attractive and sporty red and white scheme.
Scale Details Throughout
There is no shortage of scale details with this PA-22 Tri-Pacer including functional flaps, painted canopy and antenna.
Fiberglass Cowling
The cowl is made of fiberglass for both looks and durability.
Slow Trainer or Aerobatic Charmer
The PA-22 Tri-Pacer can both fly slow and easy with trainer-like dependability and stability while also performing aerobatics with ease and style.
Features:
Complete Balsa and lite-ply construction for rigidity and durability
Covered from tip to tail in scale details including functional flaps, plastic seat, antenna, printed simulated panel lines and rivets
Fiberglass cowling for strength and durability
All control surfaces come out of the box pre-hinged and installed for convenience
Large battery hatch allows for your chosen electric or gas setup
Includes:
Nexa PA-22 Tri-Pacer 1620mm (63") Wingspan - ARF
Wheels and spinner
Fuel tank, hardware and decals
Requires:
6 Channel radio - select a minimum 6 channel radio from our Radio Collection
6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
400Kv or equivalent brushless outrunner motor - we recommend the Admiral GP10 5030-400Kv Brushless Motor
60 Amp brushless ESC - we recommend the ZTW Mantis G2 85A ESC with 8A SBEC
4x mini servos for ailerons and flaps - we recommend Hitec HS-82MG Metal Gear Micro Servo Airplane Multi-Pack (4 Servos)
2x standard servos for rudder and elevator - we recommend Hitec D-645MW High Voltage High Torque Digital Metal Gear Servo Multi-Pack (2 Servos)
4 Cell 14.8V 4500 - 5000mAh LiPo Battery - we recommend the Admiral Pro 5000mAh 4S 14.8V 60C LiPo Battery with EC5 Connector
2-blade electric propeller - we recommend the APC 13x8 Thin Electric Propeller - Black
4 Cell compatible battery charger - select a minimum 4 cell (4S) charger from our Charger Collection
Gas Requires:
.46 - .70 (7.45cc - 11.5cc) gas engine - we recommend the NGH GT9 Pro 9cc Two-Stroke Engine
2-blade gas propeller - we recommend APC 12x6 Gas Propeller
Customer Note
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).