DHC-2 Westland Lysander 2540mm (100") Wingspan from Black Horse - Balsa Wood ARF - BHWL000
The Westland Lysander was designed by British manufacturer Westland Aircraft as an army co-operation and liaison aircraft. The Lysander was designed by W.E.W. “Teddy” Petter, who would go on to design aircraft such as the EE Canberra, Lightning and Folland Gnat.
The Lysanders extraordinary short take-off and landing performance made it ideal for clandestine operations during WW2 where it undertook missions for the Special Operations Executive placing and collecting agents from occupied France.
Our model is scaled to approximately 1:6 and attention has been given to providing a realistic appearance with outstanding flight characteristics. The model was designed for electric power but can also be flown using an internal combustion engine of about 30-40cc displacement.
Visit the Official Black Horse Westland Lysander 2540mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:

High level of prefabrication right out of the box
Lightweight, strong, and fully sheeted laser cut balsa and plywood construction
Panel lines and details printed directly onto the pre-applied, high quality covering
Aerofoiled tail surfaces
Recessed hinges on all control surfaces
Pre-drilled hinge mounting holes
Heavy-duty pin hinges on all control surfaces
Large easy access fuel tank\/battery\/servo access hatches with sprung loaded latches
Painted and detailed cockpit, pilot and interior included
Fiberglass control horns with ball link connector
comprehensive control and fitting accessories included
Two-piece, plug-in wings simplify transportation and assembly
Fiberglass cowl and glass reinforced landing gear covers\/pants
Mounts for both electric and gas power options included
Fully illustrated instruction manual included and available for download (see tab above)

Includes:

Black Horse Westland Lysander 2540mm (100") Wingspan - ARF

Requires (Electric):

6-8 Channel radio - select a minimum 6 channel radio from our Radio Collection

6-8 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection

2500-3200 Watt Brushless Outrunner Motor - we recommend the Admiral GP35 C6332-175Kv Brushless Motor

100-120 Amp Brushless ESC - we recommend Castle Creations Phoenix Edge High Voltage 80A ESC

7x 45g standard servos - we recommend HS-625MG

For 8S setup TWO 4 Cell 14.8V 5000 mAh LiPo Batteries with EC5 connector - we recommend TWO Admiral Pro 5000mAh 4S 14.8V 60C LiPo Batteries with EC5 Connector

EC5 2-to-1 series adapter - BenchCraft EC5 2 to 1 Series Adapter with 10 Gauge Silicone Wire

Electric propeller - we recommend the APC 20x12 Thin Electric Propeller

6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection


Requires (Gas):

Engine: 35cc 2-stroke (NGH GT35 recommended). 38-42cc 4-stroke (NGH GF38 recommended)
Gas Propeller: 18x10 - 20x8 (2 Stroke and 4 Stroke)


Customer Note
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).