DHC-2 Turbo Beaver 2250mm (88.5") Wingspan from Black Horse - Balsa Wood ARF - BHBV000
The DHC Beaver was introduced in 1947 by DeHavilland as a single engine, high wing monoplane featuring stresses skin, monocoque construction. By the end of production in 1967, some 1600 aircraft had been produced. The late version presented here is a DHC 2T Turbo Beaver and is a development of the original piston-powered plane. The Beaver has gained a well-deserved reputation as the "workhorse of the north".
The model is scaled to approximately 1:6.7 and attention was paid to a true-to-original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 20-35cc displacement.
Visit the Official Black Horse DHC-2 Turbo Beaver 2250mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:

High level of prefabrication right out of the box
Lightweight and strong, laser cut balsa and plywood construction
Finished in high quality Oracover covering
Aerofoil section tail surfaces
Large, scale, pre-hinged fuel tank\/battery\/servo access hatches with sprung loaded latches
Painted and detailed cockpit, pilot and interior included
Fiberglass control horns and clevises
comprehensive control and fitting accessories included
Two-part bolt on wing for ease of transport, assembly and storage
Fiberglass cowl and landing gear covers
Mounts for both electric and gas power options included
Fully illustrated instruction manual included and also available for download (see tab above)

Includes:

Black Horse DHC-2 Turbo Beaver 2250mm (88.5") Wingspan - ARF

Requires (Electric):

6 Channel radio - select a minimum 6 channel radio from our Radio Collection

6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection


1500 – 2000 Watt Brushless Outrunner Motor - we recommend the Admiral GP20 6320-295Kv Brushless Motor

100-120 Amp Brushless ESC - we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC

Electric propeller - we recommend the APC 18x12 Thin Electric Propeller

7x 45g standard servos - we recommend HS-625MG

6 Cell 22.2V 5000 mAh LiPo Battery with EC5 connector - we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector

6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection


Requires (Gas):

Engine: 20 - 35cc 2 or 4-stroke. GT25 2-stroke\/ GF-30 4-stroke recommended
Gas Propeller: 15x8 - 16x10 (2 Stroke) 15x10 - 17x10 (4 Stroke)


Customer Note
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).