Spitfire 2000mm (78.7") Wingspan from Black Horse - Balsa Wood ARF - BHSF000

The Supermarine Spitfire is a British single-seat fighter aircraft used by the Royal Air Force and other Allied countries before, during, and after World War II. Many variants of the Spitfire were built, using several wing configurations, and it was produced in greater numbers than any other British aircraft. It was also the only British fighter produced continuously throughout the war. The Spitfire continues to be popular among enthusiasts; nearly 60 remain airworthy, and many more are static exhibits in aviation museums throughout the world.
The model is scaled to approximately 1:5 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 30-35cc displacement.
Visit the Official Black Horse Spitfire 2000mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:

High level of prefabrication right out of the box
Lightweight, strong, laser cut balsa and plywood construction
Panel lines and details printed directly onto the pre-applied, high quality covering
Aerofoiled tail surfaces
Recessed hinges on all control surfaces
Pre-drilled hinge mounting holes
Heavy-duty pin hinges on all control surfaces
Large easy access fuel tank\/battery\/servo access hatches with sprung loaded latches
Painted and detailed cockpit, pilot and interior included
Fiberglass control horns with ball link connector
comprehensive control and fitting accessories included
Two-piece, plug-in wings simplify transportation and assembly
Fiberglass cowl and glass reinforced landing gear covers\/pants
Mounts for both electric and gas power options included

Includes:

Black Horse Spitfire 2000mm (78.7") Wingspan - ARF
Electric retractable landing gear and shock absorbing struts

Requires (Electric):

7 Channel radio - select a minimum 7 channel radio from our Radio Collection

7 Channel receiver - select a minimum 7 channel receiver from our Receiver Collection

2500+ Watt Brushless Outrunner Motor - we recommend the Admiral GP35 C6332-175Kv Brushless Motor

80+ Amp Brushless ESC - we recommend Castle Creations Phoenix Edge High Voltage 80A ESC

8x high torque servos - we recommend D-645MW (Note: these must be run at a minimum of 6V to generate enough torque. Customers will need a 9th servo for throttle if using a gas motor.)

For 12S setup TWO 6 Cell 22.2V 3500 - 5000 mAh LiPo Batteries - we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)

2 to 1 EC5 series adapter - we recommend Admiral EC5 2 to 1 Series Adapter

20 x 8E to 21 x 10E 2 blade electric propeller - we recommend APC 20x12 Thin Electric Propeller

6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection


Requires (Gas):

Engine: 30-35cc 2-stroke (NGH GT35 recommended). 38-42cc 4-stroke (NGH GF38 recommended)
Gas Propeller: (coming soon for 2 Stroke and 4 Stroke)


Customer Note
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).