Syncro 4 Red 1\/8 Scale Brushless 4WD EP Buggy - RTR from Team Corally - COR00287-R
Discover the power and precision of the Team Corally Syncro 4, a 1\/8 scale buggy engineered for both beginners and seasoned enthusiasts. With over 80% of its components shared with Team Corally's flagship models, the Syncro 4 introduces innovative features at an unbeatable price point. The introduction of new threaded composite big bore shocks, extreme composite shock towers, and a hybrid chassis brace system exemplify the perfect blend of durability, performance, and cost-effectiveness. The striking titanium-colored aluminum chassis, vibrant redesigned body, and flexible aerodynamic wing redefine off-road aesthetics.
This buggy boasts a hybrid composite\/aluminum motor mount, offering three motor position options for pinion alignment. The reinforced drivetrain, featuring steel outdrive cups and a robust 46T steel central gear, ensures exceptional durability. From the powerful Kuron 725 brushless motor to the Torox 135 ESC, every component contributes to an exhilarating top speed of 80+ km\/h. The CT2S 2.4GHz transmitter, new chassis reinforcement system, and reinforced high-downforce wing complete the package. With the Syncro 4, Team Corally continues its legacy of innovation, offering unbeatable performance without compromise.
Visit the Official Team Corally Syncro 4 1\/8 Scale Brushless 4WD EP Buggy Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Precision Molded Steel Gears
The gears and differentials on the Team Corally Syncro 4 share the same similar design and same dimensions as our acclaimed 6S lineup. All diffs feature proven internals found in our 6S lineup, including all hardware. Additionally, the center differential features a reinforced plastic case. The straight-cut metal bevel gears, reminiscent of the proven Radix4, provide ample strength for the Syncro 4's 4S power system. While not as rugged as those in the Spark XB6, these gears are purpose-built for the Syncro 4, delivering a perfect balance of durability and power for your off-road adventures.
Extra Large Battery Compartment
Designed to accommodate a wide range of LiPo pack setups, the tray supports battery sizes up to 51x161mm, with a maximum height of 38mm. The Syncro 4 inherits the Spark XB6's legacy, providing a spacious battery tray that ensures compatibility and convenience. Included Velcro straps, engineered for a snug and secure fit, simplify battery changes, making transitions from a 3S to a 4S setup a straightforward and effortless process.
Aerodynamic Flex Wing
This innovative wing introduces enhanced flexibility compared to its predecessor, ensuring optimal performance in varied conditions. Its aggressive design not only adds a touch of style but also maximizes downforce, providing stability during high-speed runs and jumps.
Heavy-Duty Steering Blocks
Drawing inspiration from the esteemed 6S lineup, the Team Corally Syncro 4 boasts composite steering knuckles that redefine precision. These steering blocks enhance the fit and security of the pillow balls, leaving no room for any possibility of dislodging during rough landings or collisions.
Features:
Speeds of up to 80+ km\/h (50+ MPH) are possible
Pre-built Ready to Run bash buggy
Team Corally TOROX 135 ESC 3-4S with LiPo protection
Team Corally Kuron 725 2150kV 4-pole brushless motor
CRHV-7225 HV metal gear 25Kg torque steering servo
Team Corally CT2S interference-free 2.4GHz transmitter with 50%\/100% power switch
Aluminum servo arm
One-piece composite steering link
Splash-proof and dustproof electronic box with transponder mount
XL Adjustable battery holder for all common LiPo batteries
Full set of ball bearings, rubber sealed
All transmission ball bearings are 8x16x5mm
Steel spur gear and motor pinion
Three sealed differentials individually filled with silicone oil
Quick and easy diff access
Hybrid aluminum and composite motor holder with spur gear cover
Fixed motor position for 13T, 15T and 17T pinion
46T steel central gear
Ultra-rigid hybrid chassis brace system
Complete hard coated steel outdrives
Extra surface hardened steel front CVD joints
Aluminum 17mm drive hexes
Oil-filled threaded 16mm plastic big bore shocks
Shock spring perches locking system
Nylon composite shock cap protectors
Composite front and rear shock towers
Independent pivot ball front suspension
Independent double wishbone rear suspension
Optimized custom developed composite parts
Heavy duty front steering blocks and rear hubs
Thick 4mm aluminum suspension pin braces
Composite suspension braces protectors
Heavy duty one-piece composite suspension links and tie rods
3mm aluminum laser etched chassis plate
Reinforced chassis side guards with integrated body protection
Heavy duty front bumper
Central chassis reinforcement system with 3mm aluminum plate
Reinforced high downforce wing
Factory-glued high-speed, low-profile tires on black multi-spoke composite wheels
Sturdy, elaborately printed polycarbonate body available in 4 color schemes
Wide assortment of tuning parts available for individual customization
Includes:
Team Corally Syncro 4 Red 1\/8 Scale Brushless 4WD EP Buggy - RTR
Custom painted body
Team Corally CT2S 2.4GHz transmitter with 50%\/100% power switch
Team Corally Kuron 725 2150Kv 4-pole brushless motor 2-4S
Team Corally TOROX 135 ESC 2-6S with LiPo protection (programmable)
Varloprop CRHV-7225 HV metal gear 25Kg torque steering servo
Adjustable battery holder for all common LiPo batteries
Instruction manual
Requires:
4x AA batteries for 2.4GHz radio transmitter - we recommend Admiral AA NiMH 2600mAh Rechargeable Batteries (Pack of 4)
2S to 4S (7.4V to 14.8V) LiPo Battery with XT90 connector - we recommend the Admiral 5300mAh 4S 14.8V 60C Hard Case LiPo Battery with XT90 Connector
2 Cell to 4 Cell compatible battery charger - select a minimum 2 cell (2S) charger from our Charger Collection