Fly Baby 1618mm (63.7") Wingspan - ARF from Nexa - NXA1060-001
The Nexa Fly Baby ARF faithfully reproduces the classic Bower's Fly Baby, a beloved homebuilt aircraft renowned in the EAA community. Ready to assemble out of the box with all hardware included, it is the perfect introduction to this classic homebuilt aircraft.
This Fly Baby is an ideal model for intermediate pilots looking for a fun, easy airplane for practice and recreational flying. The full size aircraft that inspired this model has been flown for air shows across the Midwest and its vibrant scale color scheme looks great in the sky. Experienced modelers will also find the Fly Baby easy and enjoyable to fly.
Visit the Official Nexa Fly Baby 1618mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
\n
\n
\nFully Covered in Weathered Detail
The Nexa Fly Baby comes fully covered with an attractive blue and yellow livery with weathered detail for a more scale appearance.
\n
\n
\n
\n
\nScale Details Throughout
Along with the fiberglass cowl, the Fly Baby has a painted cockpit, pilot, dummy radial engine and other scale details.
\n
\n
\n
\n
\nPre-Hinged and Pre-Installed Hinges
All control surfaces and hinges come pre-hinged and pre-installed for your convenience, lessoning build time.
\n
\n
\n
\n
\nBalsa and Lite-Ply Construction
The Nexa Fly Baby is manufactured with balsa and lite-ply construction for a durable yet lightweight airframe for better performance.
\n
\n
Features:
\nFactory laser cut, jig-built
All balsa and lite-ply construction
Factory covered and finished
Hand painted pilot
Fiberglass cowling
Control surfaces pre-hinged and installed
Two piece wing with aluminum wing joiner
Molded dummy engine cylinders
Compatible with glow and electric power setups
Big battery hatch for ease of access
Easy-to-remove fuselage top cover
Complete hardware package
\nIncludes:
\nNexa Fly Baby 1618mm (63.7") Wingspan - ARF
Assembly instructions with stage photos
Tail wheel assembly
Fiberglass cowling
Fiberglass painted pilot
Wheels, wheels cover
Aluminum wing joiner
Engine mounts
Spinner
Fuel tank
Decals and all hardware
\nRequires:
\n4 Channel radio - select a minimum 4 channel radio from our Radio Collection
\n4 Channel receiver - select a minimum 4 channel receiver from our Receiver Collection
\n400Kv or equivalent brushless outrunner motor - we recommend the Admiral GP10 5030-400Kv Brushless Motor
\n70 Amp brushless ESC - we recommend the ZTW Mantis G2 85A ESC with 8A SBEC
\n4x metal gear servos for ailerons, elevator, and rudder - we recommend Hitec D-645MW High Voltage High Torque Digital Metal Gear Servo Airplane Multi-Pack (4 Servos)
\n2x micro metal gear servos for flaps - we recommend Hitec HS-82MG Metal Gear Micro Servo Airplane Multi-Pack (2 Servos)
\n5 Cell 18.5V 4000 - 5000mAh LiPo Battery - we recommend the Admiral Pro 4000mAh 5S 18.5V 60C LiPo Battery with EC5 Connector
\nStandard 13x8 2-blade electric propeller - we recommend the APC 13x8 Thin Electric Propeller - Black
\n5 Cell compatible battery charger - select a minimum 5 cell (5S) charger from our Charger Collection
\nElectric retracts with upgraded struts - Nexa 46 Size Electronic Retract Set with Upgraded Struts
\n
Gas Requires:
\n.46 - .70 (7.45cc - 11.5cc) gas engine - we recommend the NGH GT9 Pro 9cc Two-Stroke Engine
\nStandard 12x6 2-blade gas propeller - we recommend the APC 12x6 Gas Propeller
\n
\nCustomer Note
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).