Futaba 6K-V3S 8-Channel Transmitter with R3008SB Receiver - FUTK6100
An incredible value in 8-channel control
You'll be hard pressed to find another 8-channel system with as many functions as the 6K at a comparable price. Telemetry sensors monitor critical flight data, including temperature, RPM, altitude, receiver battery voltage, external voltage and variometer. It's compatible with S.Bus and S.Bus2 servos, and setting functions can be programmed through the transmitter. Controls are positioned to be within easy reach, and the menu is a breeze to navigate.
Throw in other features such as 30 model memory, a 128x64 DOT backlit LCD screen and updateable software, and it's easy to see how the 6K is a lot of radio for the money. With the V3 version updates the value has never been better! The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.




The Power of 2.4GHz

The 6K-V3S utilizes modern 2.4GHz signal transmission and reception technology that delivers incredible reliability and unparalleled signal strength.










74 Years of Service and Counting

Futaba was founded in Japan in 1948. With over 5,000 international employees and hundreds of thousands of products delivered across generations, Futaba remains leaders in RC technology and products. Fly only the best with Futaba!




Features:


NEW! 8 channel receiver (R3008SB) is included

NEW! Switch D is changed from 2 positons to 3 positons

NEW! Glider functions strengthened (Added wing type 2AIL-B, Trim-mix for rudder, conditions increased from 3 to 4)

NEW! Timer (Added 1 more time and having 2 timers)

NEW! Helicopter function (Governor gain added)
S-FHSS\/T-FHSS selectable

Telemetry system (T-FHSS) with data speech function
Built-in antenna
S.Bus\/S.Bus2 servo setting functions programmable through the transmitter
Preset vibration alarms
30 model memory
8-character model\/user naming
Programmable mixes for airplanes, helicopters, gliders and multi-rotors
Digital trims with variable step settings
Adjustable stick length and tension
Changeable switch\/VR position and AUX channel function
Throttle position warning
Backlit 128x64 DOT LCD screen with adjustable display contrast
Software updateable through the CIU-2
Screen Lock
Earphone\/S.Bus\/Trainer jacks
Assignable switches (three 3-position, one 2-position)
Range Check
Program navigation bay with jog dial, +\/- pads and end pad
Data reset
Model copy
Selectable model type
Fail Safe
End Points
Trim\/Trim Resets\/Trim Steps
Sub Trim
Servo Reversing
Parameter functions
Servo monitor\/Test
Wireless model data transfer
Timer-System and Model (Up\/Down)
Trainer system

Includes:

Futaba 6K-V3S 8-Channel Transmitter
R3008SB 8 CH Receiver

Requires:

Four (4) AA size batteries – we recommend Admiral NiMH AA Rechargeable Batteries (4 Pack)


Optional:


6V NiMH or 6.6V LiFe batteries







The included R3008SB receiver has eight standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors.




The versatile 6K meets the control needs of a wide range of R\/C pilots!








Program navigation is easy and intuitive with the jog dial, +\/- pads and end pad.





The 6K is a full-range system. Its antenna is inside the transmitter case for safety and convenient handling.





This variable rate dial can be programmed for a variety of functions. A speaker provides audible alerts and cues for navigating the programming menus.






Four assignable switches (three 3-position and one 2-position) offer maximum flexibility.





6K Version 2 multicopter programming has been expanded with five Priority and nine Matrix flight conditions.





The nine Matrix flight conditions can be used to set up a tilt camera by assigning nine settings to two 3-position switches.






Using an SBS-01V External Voltage Telemetry Sensor and SBS-01C Current Telemetry Sensor, the 6K collects real time telemetry data for motor current, battery voltage and capacity. (not included)