Antonov An-2 2425mm (95.47") Wingspan from Black Horse - Balsa Wood ARF - BHM1015-001
The Antonov An-2 biplane is a Soviet aircraft produced from 1947 to 2001, and is a popular choice for military and civilian operators worldwide. Famous for its ability to take off and land from difficult runways, its durable airframe and impressive payload capacity are ideal for forestry, agriculture and a variety of other purposes. Variants of the An-2 include crop-dusters, water-bombers, flying ambulances, seaplanes and lightly armed combat models.
The model is scaled to approximately 1:5 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 65-100cc displacement.
Visit the Official Black Horse Antonov An-2 2425mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.





Factory Weathered Printing
The printing on this model has a realistic weathering complete with rivet and panel line detail that elevates the model to a whole new level of scale appeal.









Naca Airfoil Design For Improved Airflow
The Antonov An-2 utilizes a Naca airfoil design which maximizes airflow above and below each wing for increased lift and performance.









Electric Power
The Antonov An-2 uses an electric power recommendation with ample room for your electronics but can accept a gas power setup as well.









Large Wingspan
The impressive 95.4" wingspan offers impressive presence both in the air and on the ground.




Features:

High level of prefabrication right out of the box

Lightweight, strong, laser cut balsa and plywood construction
Panel lines and details printed directly onto the pre-applied, high quality covering
Recessed hinges on all control surfaces
Pre-drilled hinge mounting holes
Heavy-duty pin hinges on all control surfaces
Large easy access fuel tank\/battery\/servo access hatches with spring loaded latches
Painted and detailed cockpit, pilot and interior included
Fiberglass control horns with ball link connector
Comprehensive control and fitting accessories included
Four-piece, plug-in wings simplify transportation and assembly
Fiberglass cowl
Mounts for both electric and gas power options included

Includes:

Black Horse Antonov An-2 2425mm (95.47") Wingspan - ARF
Instruction manual


Requires (Electric):

12 Channel radio - select a minimum 12 channel radio from our Radio Collection

12 Channel receiver - select a minimum 12 channel receiver from our Receiver Collection

180Kv Brushless outrunner motor - we recommend the Admiral GP60 8925-180Kv Brushless Motor

120 Amp brushless ESC - we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC

2x 2S 2000-3000mAh LiPo or LiFe receiver packs - we recommend Admiral 2100mAh 2S 6.6V LiFe Battery with XT60\/JR\/Futaba Connectors

10x high torque servos - we recommend 10 Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servos

For 12S setup TWO 6 Cell 22.2V 5000 - 5500mAh LiPo Batteries with EC5 connector in series - we recommend Admiral Carbon 5100mAh 6S 22.2V 70C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)

2 to 1 EC5 series adapter - we recommend BenchCraft EC5 2 to 1 Series Adapter

Electric propeller - we recommend a APC 24x14E propeller
6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection


Requires (Gas):

Engine: 65-100cc gas
Gas Propeller: Follow engine manufacturer's guidelines



Customer Note
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).