Admiral 100W 6 Cell (6S) LiPo Smart Battery Charger - ADM6026-002
The Admiral 10A Smart Battery Charger is an essential part of any RC hobbyist's toolset. Capable of charging 2S-6S batteries at up to 10A, this charger can recharge the many common voltage LiPo and NiMH batteries in the RC car, airplane, boat, and tank categories. An intuitive programming menu allows quick setup for fast charging, balance charging, and discharging\/storage modes. Set the battery type and charge mode, select the voltage and desired current, then begin charging!
Note: The balance ports are now built into the side of the charger (not shown in the picture). A balance board is not needed because it is now internal and built into the charger.
Features:

Single Channel AC Balance Charger
Small & Lightweight Portable Design
Capable of 10 amp charge rates, worldwide 100V-240V voltage versatility, with 100 Watts of power
Charges up to 18 NiMH cells or 6S Lithium batteries (including LiPo\/LiFe\/LiHV)

Includes:

Admiral 10A 6 Cell (6S) LiPo Smart Battery Charger
AC Input Cable
XT60 Connector (XT60 batteries plug directly into the charger)
JST Charge Lead
T Plug charge Lead
EC3 Charge Lead
EC5 Charge Lead


** LiPo BATTERY CHARGER SAFETY WARNING **
Never, under ANY circumstances, leave your charger unattended while charging a LiPo battery. Keep the charger away from moisture, dust, direct sunlight, or any heat sources. The charger should always be placed on a heat-resistant, non-flammable surface during charging. Never overcharge or exceed a 1C charge current. A 1C charge current means the charge current equals the capacity of the battery. For example, a 2200mAh battery should never be charged using a current greater than 2.2 Amps (2200mAh).